2012 Dodge Challenger Owner Manual - Page 154
2012 Dodge Challenger Manual
Page 154 highlights
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Set A Desired Speed Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed, press the SET (-) button and release. Release the accelerator and the vehicle will operate at the selected speed. To Resume Speed To resume a previously set speed, push the RES (+) button and release. Resume can be used at any speed above 20 mph (32 km/h). To Vary The Speed Setting NOTE: The vehicle should be traveling at a steady When the Electronic Speed Control is set, you can inspeed and on level ground before pressing the SET crease speed by pushing the RES (+) button. If the button is continually pressed, the set speed will continue to button. increase until the button is released, then the new set To Deactivate speed will be established. A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the Pressing the RES (+) button once will result in a 1 mph vehicle will deactivate Electronic Speed Control without (2 km/h) increase in set speed. Each subsequent tap of erasing the set speed memory. Pressing the ON/OFF the button results in an increase of 1 mph (2 km/h). button or turning the ignition switch OFF erases the set speed memory.