2012 Dodge Challenger Owner Manual - Page 158

156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For more efficient programming and accurate transmis- • If you have any problems, or require assistance, please sion of the radio-frequency signal it is recommended that call toll-free 1-800-355-3515 or, on the Internet at a new battery be placed in the hand-held transmitter of www.HomeLink.com for information or assistance. the device that is being programmed to the HomeLink௡ Programming A Rolling Code system. For programming garage door openers that were manuErase all channels before you begin programming. To factured after 1995. These garage door openers can be erase the channels place the ignition in the ON/RUN identified by the "LEARN" or "TRAIN" button located position and press and hold the two outside HomeLink௡ where the hanging antenna is attached to the garage door buttons (I and III) for up 20 seconds. The Electronic opener. It is NOT the button that is normally used to Vehicle Information Center (EVIC) will display "CLEAR- open and close the door. The name and color of the ING CHANNELS". Release the buttons when the EVIC button may vary by manufacturer. displays "CHANNELS CLEARED". NOTE: • Erasing all channels should only be performed when programming HomeLink௡ for the first time. Do not erase channels when programming additional buttons.