2012 Dodge Challenger Owner Manual - Page 263

STARTING AND OPERATING 261 NOTE: • If the ignition switch is left in the ACC position, the system will automatically time out after 30 minutes of inactivity and the ignition will switch to the OFF position. Keyless Enter-N-Go Functions - With Driver's Foot OFF The Brake Pedal/Clutch Pedal (In PARK Or NEUTRAL Position) The Keyless Enter-N-Go feature operates similar to an ignition switch. It has four positions, OFF, ACC, RUN and START. To change the ignition switch positions • If the ignition switch is left in the RUN position, the without starting the vehicle and use the accessories system will automatically time out after 30 minutes of follow these steps. inactivity if the vehicle speed is 0 mph (0 km/h) and • Starting with the ignition switch in the OFF position: the engine is not running. • If the vehicle speed is above 5 mph (8 km/h), the • Press the ENGINE START/STOP button once to ENGINE START/STOP button must be held for two change the ignition switch to the ACC position (EVIC seconds before the engine will shut off. The ignition displays "IGNITION MODE ACCESSORY"), switch position will remain in the ACC position until • Press the ENGINE START/STOP button a second time the vehicle is stopped and the button is pressed twice to change the ignition switch to the ON/RUN position to the OFF position. (EVIC displays "IGNITION MODE RUN"), 5