2012 Dodge Challenger Owner Manual - Page 368

366 WHAT TO DO IN EMERGENCIES 2. Disconnect the TIREFIT kit from the valve stem, 2. Locate the round Sealant Bottle release button in the reinstall the cap on the valve stem and unplug from 12 recessed area under the sealant bottle. Volt outlet. 3. Press the Sealant Bottle release button. The Sealant 3. Place the TIREFIT kit in its proper storage area in the Bottle (1) will pop up. Remove the bottle and dispose of it accordingly. vehicle. 4. Have the tire inspected and repaired or replaced at the 4. Clean any remaining sealant from the TIREFIT housearliest opportunity at an authorized dealer or tire ser- ing. vice center. 5. Position the new Sealant Bottle (1) in the housing so 5. Replace the Sealant Bottle (1) and Sealant Hose (6) that the Sealant Hose (6) aligns with the hose slot in the assembly at your authorized dealer as soon as possible. front of the housing. Press the bottle into the housing. An audible click will be heard indicating the bottle is locked Refer to "(F) Sealant Bottle and Hose Replacement." into place. NOTE: When having the tire serviced, advise the authorized dealer or service center that the tire has been 6. Verify that the cap is installed on the fitting at the end of the Sealant Hose (6) and return the hose to its storage sealed using the TIREFIT service kit. area (located on the bottom of the air pump). (F) Sealant Bottle And Hose Replacement: 7. Return the TIREFIT kit to its storage location in the 1. Uncoil the Sealant Hose (6) (clear in color). vehicle.