2012 Dodge Challenger Owner Manual - Page 366

364 WHAT TO DO IN EMERGENCIES If the tire inflates to the recommended pressure or is at least 26 psi (1.8 Bar) pressure within 15 minutes: 1. Press the Power Button (4) to turn off the TIREFIT kit. 2. Remove the Speed Limit sticker from the top of the Sealant Bottle (1) and place the sticker on the instrument panel. CAUTION! (Continued) • Failure to reinstall the cap on the fitting at the end of the Sealant Hose (6) can result in sealant contacting your skin, clothing, and the vehicle's interior. It can also result in sealant contacting internal TIREFIT kit components which may cause permanent damage to the kit. 3. Immediately disconnect the Sealant Hose (6) from the valve stem, reinstall the cap on the fitting at the end of the (D) Drive Vehicle: hose, and place the TIREFIT kit in the vehicle storage Immediately after injecting sealant and inflating the tire, location. Quickly proceed to (D) "Drive Vehicle". drive the vehicle 5 miles (8 km) or 10 minutes to ensure distribution of the TIREFIT Sealant within the tire. Do not CAUTION! exceed 55 mph (88 km/h). • The metal end fitting from Power Plug (8) may get hot after use, so it should be handled carefully. (Continued)