2012 Dodge Challenger Owner Manual - Page 80

78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE then allow the belt to retract into the retractor. For To attach a child restraint tether strap: additional information on ALR, refer to "Automatic 1. Rotate the cover over the anchor directly behind the Locking Mode". seat where you are placing the child restraint. Driver Center Passenger CRS Lock CRS Lock CRS Lock First Row N/A N/A ALR Second Row ALR ALR ALR • N/A - Not Applicable • ALR - Automatic Locking Retractor To install a child restraint, first, pull enough of the seat belt webbing from the retractor to route it through the belt path of the child restraint and slide the latch plate into the buckle. Next, extract all the seat belt webbing out of the retractor and then allow the belt to retract into the retractor. Finally, pull on any excess webbing to tighten the lap portion around the child restraint. Any seat belt system will loosen with time, so check the belt occasionally, and pull it tight if necessary. Tether Strap Mounting 1 - Cover 3 - Attaching Strap A - Tether Strap Hook B - Tether Anchor