2009 Mercedes CL-Class Owner's Manual - Page 228

Control systems COMAND automatic climate control Selecting Mono mode Mono is used to adjust the climate zones for the entire vehicle at the same time. When the Mono function is switched on and you change the climate on the driver's side, these changes will be carried out in the same manner for all climate zones. X Select climate control settings £ Central climate control menu. X Selecting Mono: Slide qmr or rotate ymz. X Confirming selection: Press n. A checkmark appears when the function has been selected. Rchange an climate control setting for the front passenger side using COMAND a button from the climate control for the front passenger side one of the buttons for the rear climate control system Roperate Roperate Adjusting footwell temperature i In automatic mode, this setting optimizes the footwell temperature when outside temperatures are low. The Footwell Temperature function is used to adjust the temperature difference between the footwell and the rest of the passenger compartment. The higher the selected value, the higher the temperature in the footwell will be. X Select climate control settings £ Central climate control menu. X Selecting Footwell Temperature: Slide qmr or rotate ymz and then press n. X Changing temperature difference: Slide qmr or rotate ymz. X Exiting menu: Press n, back button L in the center console (Y page 79) or slide omp. The setting is saved. Adjusting air flow from air vents i In automatic mode, this setting optimizes the air flow when outside temperatures are high. The Airflow setting defines air distribution and air volume in automatic mode: X Exiting menu: Press back button L in the center console (Y page 79) or slide omp. The Mono function is automatically switched off when you: 226