2009 Mercedes CL-Class Owner's Manual - Page 308
2009 Mercedes CL-Class Manual
Page 308 highlights
Controls in detail Seats the seat adjustment switch in the door control panel or by moving the release lever again. an authorized Mercedes-Benz Center immediately. Head restraint fore and aft adjustment G Warning! The seat belts provide protection only with the seat backrest locked in place. Therefore, the seat backrest must be locked in place with the vehicle in motion. Do not drive the vehicle when the seat backrest is not locked in place. If the warning message: Lock Seat Backrest Front Right or Lock Seat Backrest Front Left is displayed in the multifunction display, then the respective seat backrest is not engaged in its lock. Carefully slow down, and drive with caution to an area which is in a safe distance from the roadway. Always provide sufficient room behind the seat backrest and fold the seat backrest all the way back until it locks in place. The warning message is no longer displayed as soon as the seat backrest is locked in place. If both seat backrests are locked in place and the warning message is still displayed, have the system checked at ! The automatic seat slide is provided with a safety feature. The automatic process is interrupted if the seat backrest of the sliding seat is pushed against an occupant or object. The seat will slide forward and stop. Investigate and correct the cause of interruption. Now use memory button or seat adjustment switch to bring the seat into the desired position. When folding the seat backrest forward from a reclined position, and then folding it back, the seat backrest stops in a more upright position for the safety of any rearseat passenger. Adjust the seat backrest until your arms are slightly angled when holding the steering wheel. X Adjust the head restraint to the desired position by pushing or pulling on the upper edge of the head restraint cushion. Easy-entry/exit feature This feature allows for easier entry into and exit from the vehicle. When entering and exiting the vehicle, the driver's seat is in its maximum rearward position and the steering wheel is in its uppermost position. The easy-entry/exit feature can be activated or deactivated in the Vehicle menu of the COMAND system (Y page 219). 306
![](/manual_guide/autos/2009-mercedes-clclass-owners-manual-04bb2dc/308.png)