2009 Mercedes CL-Class Owner's Manual - Page 316

Controls in detail Memory function X Make sure you have stored a parking position for the passenger-side exterior rear view mirror (Y page 315). X Make sure the Lower mirror when reversing function in the Exterior Mirror Convenience Settings submenu of the COMAND system is selected. X Switch on the ignition. X Press button 2 for the passenger-side exterior rear view mirror. Rimmediately Rimmediately once your vehicle exceeds a speed of approximately 6 mph (10 km/h) Memory function Notes With the memory function you can store up to three different configurations per front seat. Each memory position button on the driver's side can store all of the following settings: RSeat when you press button 1 for driver's side exterior rear view mirror. i If you adjust the exterior mirrors while they are in the parking position, the new mirror position is stored as a new parking position. position support (CL 550 4MATIC) RLumbar i With the automatic transmission in reverse gear R, the previously selected exterior rear view mirror is activated. X Shift the automatic transmission into reverse gear R. The passenger-side exterior rear view mirror will be turned downward to the stored position. The exterior rear view mirror returns to its previously stored driving position: Rwhen you switch off the ignition R10 seconds after you have put the gear selector lever out of reverse gear R RMulticontour seat: previously saved setting RDrive-dynamic RSteering RExterior multicontour seat: activation/deactivation wheel position rear view mirrors' position G Warning! Do not activate the memory function while driving. Activating the memory function while driving could cause the driver to lose control of the vehicle. Each memory position button on the front passenger side can store all of the following settings: RSeat position RMulticontour seat: previously saved setting 314