2009 Mercedes CL-Class Owner's Manual - Page 358
2009 Mercedes CL-Class Manual
Page 358 highlights
Controls in detail Driving systems Rif Rif the driver's door is open and the driver has not fastened his or her seat belt the radar sensors are switched off (Y page 247) Switching on while driving X If you do not completely remove your foot from the accelerator pedal, the message DISTRONIC PLUS Override appears in the multifunction display. The distance to a slower-driving vehicle will not be set. You will drive at the speed you dictate by pressing the accelerator pedal. You can adjust the set speed using the DISTRONIC Plus lever and the target distance using the distance setting switch on the DISTRONIC Plus lever (Y page 360). Tap the DISTRONIC Plus lever up 1 or down 2 until desired speed is set. The DISTRONIC Plus is switched on. Switching on when approaching a stationary vehicle If the preceding vehicle is stationary, you can only switch on the DISTRONIC Plus if your vehicle is also at a standstill. X Tap the DISTRONIC Plus lever up 1 or down 2 until desired speed is set. The DISTRONIC Plus is switched on. or X Pull the DISTRONIC Plus lever briefly in direction of arrow 4 to call up the last set speed, or if no speed is stored, to set and store the current speed. The DISTRONIC Plus is switched on. It is helpful to switch on the DISTRONIC Plus display in the multifunction display (Y page 353) since you can only switch on the DISTRONIC Plus below a speed of 20 mph (30 km/h) when a preceding vehicle is detected. i If the DISTRONIC Plus is switched off, the PRE-SAFE® Brake (Y page 72) will warn of an impending collision if this function has been activated with the instrument cluster control system (Y page 244). Starting off When the preceding vehicle starts off: X X or X Pull the DISTRONIC Plus lever briefly in direction of arrow 4 to call up the last set speed, or if no speed is stored, to set and store the current speed. The DISTRONIC Plus is switched on. X Remove your foot from the accelerator pedal. Your vehicle adapts its speed to the preceding vehicle, observing the set speed as a maximum value. Below 20 mph (30 km/h), you can only switch on the DISTRONIC Plus if the preceding vehicle has been detected and is shown in the multifunction display. If you no longer see the preceding vehicle in the multifunction display and if it is no longer detected because it has changed lanes, for example, the DISTRONIC Plus switches off and a signal sounds. Remove your foot from the brake pedal. Pull the DISTRONIC Plus lever briefly in direction of arrow 4. or X Briefly step on the accelerator pedal. Your vehicle starts off and adapts its speed to the preceding vehicle. Driving If there is no preceding vehicle, the DISTRONIC Plus functions like the cruise control (Y page 347). When the DISTRONIC Plus detects that the preceding vehicle is driving more slowly, it 356