2009 Mercedes CL-Class Owner's Manual - Page 309
2009 Mercedes CL-Class Manual
Page 309 highlights
Controls in detail Seats G Warning! You must make sure no one can become trapped or injured by the moving steering wheel and driver's seat when the easyentry/exit feature is activated. To stop seat/steering wheel movement, do one of the following: RPress seat adjustment switch RMove steering wheel adjustment stalk RPress one of the memory position buttons or the memory button M Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Children could open the driver's door and unintentionally activate the easyentry/exit feature, which could result in an accident and/or serious personal injury. factory-set maximum forward position when you: Rclose the driver's door with the ignition switched on Rinsert Rremove the SmartKey from the starter switch, or Ropen the driver's door with the SmartKey in the SmartKey into the starter switch or press the KEYLESS-GO start/stop button once with the driver's door closed starter switch position 0 or 1 or the KEYLESS-GO start/stop button in position 1 ! Do not activate the easy-entry/exit feature if the seat backrest is in an excessively reclined position. Doing so could cause damage to front or rear seats. First move the seat backrest to an upright position. With the easy-entry/exit feature activated, the steering wheel and driver's seat will return to their last set memory position or a i For safety reasons, the driver's seat will not return to its last set position with the easy-entry/ exit feature activated if the system recognizes the last set position as an extreme forward position. Instead, the driver's seat will remain at or move to a factory-set maximum forward position. To again fully return the driver's seat to your last set position or to memory position, adjust the seat to the desired position or press and hold the respective memory position button (Y page 315). i The last set driver's seat and steering wheel positions are stored when the ignition is switched off and the position is stored in memory. With the easy-entry/exit feature activated the steering wheel tilts upwards and the driver's seat moves a few inches to the rear when you: i If the current position for the steering wheel is in the uppermost tilt position, the steering wheel will no longer be able to move upward when the easy-entry/exit feature is activated. If the current seat position falls into a factory-set position range and the system recognizes the current seat position to be rearward enough for easy entry and exit, the driver's seat will not move to the rear when the easy-entry/ exit feature is activated. The adjustment procedure is briefly interrupted when the engine is started. G Warning! Let the system complete the adjustment procedure before setting the vehicle in motion. All driver's seat and steering wheel adjustments must be completed before setting the vehicle in motion. Driving off with the driver's seat/steering wheel still Z 307