2009 Mercedes CL-Class Owner's Manual - Page 65
2009 Mercedes CL-Class Manual
Page 65 highlights
Safety and security Occupant safety Position shoulder belt across chest and shoulder, not face or neck. A booster seat may be necessary to achieve proper seat belt positioning for children over 41 lb (18 kg) until they reach a height where a lap/shoulder belt fits properly without a booster. Install child seat according to manufacturer's instructions. The child seat must be firmly attached to the right and left side anchors. An incorrectly mounted child seat may come loose during an accident which could result in serious injury or death to the child. Damaged or impact damaged child seats or child seat mounting fittings must be replaced. Non-LATCH-type child seats may also be used and can be installed using the vehicle's seat belt system. Install child seat according to the manufacturer's instructions. The LATCH-type anchors are covered with upholstery blends. Child safety Override switch G Observe Safety notes, see page 59. With the override switch you can disable the rear side window switches in the rear trim panels. G Warning! Activate the override switch when children are riding in the back seats of the vehicle. The children may otherwise injure themselves, e.g. by becoming trapped in the window opening. 1 Indicates the position of the anchors 2 Anchors 3 Upholstery blend 4 Installation device X Fold upholstery blend 3 upward to access anchors 2. X Turn installation device 4 to a vertical position so that upholstery blend 3 does not fold down. X Install a LATCH-type child seat according to the manufacturer's instructions. A rigid connection between the child seat and the body of the vehicle is established. 1 Override switch 2 Indicator lamp Z 63