2009 Mercedes CL-Class Owner's Manual - Page 546

Practical hints Replacing bulbs Front lamps Lamp 1 Low- and high-beam lamp9 Type D1S-35 W Rear lamps Lamp 9 High-mounted brake lamp a Brake lamp, tail lamp, parking and standing lamp b Turn signal lamp c License plate lamps d Rear fog lamp (driver's side only) e Backup lamp f Side marker lamp Type LED LED RYour hands should be dry and free of oil and grease. RIf the newly installed bulb does not come on, contact an authorized Mercedes-Benz Center. 2 High-beam flasher lamp H11 (55 W) IR emitter (for Night View Assist) 3 Additional turn signal lamp 4 Side marker lamp 5 Parking and standing lamp 6 Turn signal lamp 7 Corner-illuminating lamp 8 Front fog lamp H11 (55 W) LED W5W W5W PY 24 W H7 (55 W) H11 (55 W) i Mercedes-Benz recommends using Longlife (LL) bulbs. ! Do not replace LEDs and bulbs yourself. You could otherwise damage the LEDs, the bulbs or parts of the vehicle. Only have the LEDs and bulbs replaced at an authorized Mercedes-Benz Center. Replacing bulbs for front lamps G Warning! Do not remove the cover for the Bi-Xenon headlamp. Because of high voltage in Xenon lamps, it is dangerous to replace the bulb or repair the lamp and its components. It is recommended to have such work done by a qualified technician. i Replacing the bulbs for the front lamps is a technically complex process. Have such HiP W5W HiP HiP LED Notes on bulb replacement ROnly use 12-volt bulbs of the same type and with the specified watt rating. RSwitch the lights off before changing a bulb to prevent short circuits. RAlways use a clean lint-free cloth when handling bulbs. 9 Vehicles with Bi-Xenon headlamps: Low beam and high beam use the same D1S-35 W lamp. Do not replace the Bi-Xenon bulbs yourself. Contact an authorized Mercedes-Benz Center. 544