2011 Mercedes R-Class Owner's Manual - Page 121
2011 Mercedes R-Class Manual
Page 121 highlights
Exterior lighting Combination switch Turn signals High-beam flasher X 119 To switch on: turn the key in the ignition lock to position 1 or 2 or start the engine. X Pull the combination switch briefly in the direction of arrow =. Hazard warning lamps : High-beam headlamps ; Right turn signal = High beam flasher ? Left turn signal X To indicate briefly: press the combination switch briefly to the pressure point in the direction of arrow ; or ?. The corresponding turn signal flashes three times. X To indicate: press the combination switch beyond the pressure point in the direction of arrow ; or ?. The hazard warning lamps automatically switch on: Rif High-beam headlamps X To switch on the high-beam headlamps: turn the key in the ignition lock to position 2 or start the engine. X Turn the light switch to L. X Press the combination switch beyond the pressure point in the direction of arrow :. The K indicator lamp in the instrument cluster lights up. X To switch off the high-beam headlamps: move the combination switch back to its normal position. The K indicator lamp in the instrument cluster goes out. an air bag is deployed vehicle decelerates rapidly from a speed of more than 45 mph (70 km/h) and comes to a standstill. X To switch on the hazard warning lamps: press button :. All turn signals flash. If you now switch on a turn signal using the combination switch, only the turn signal lamp on the corresponding side of the vehicle will flash. X To switch off the hazard warning lamps: press button :. Rthe The hazard warning lamp switches off automatically after full brake application if the vehicle then reaches a speed above 6 mph (10 km/h) again. i The hazard warning lamps still operate if the ignition is switched off. Headlamp cleaning system The headlamps are cleaned automatically if the "Wipe with washer fluid" function is Z Lights and windshield wipers