2011 Mercedes R-Class Owner's Manual - Page 213

Menus and submenus Resetting values X 211 Press V or U on the steering wheel to select the trip computer menu. X Press & or * to select the function that you wish to reset. X Press and hold the . reset button on the instrument cluster until the values have reverted to "0". Calling up the range X Press V or U on the steering wheel to select the trip computer menu. X Press & or * to select Range:. The multifunction display shows the estimated range of the vehicle, based on the current driving style and the fuel level. If there is only a small amount of fuel remaining in the fuel tank, a vehicle refueling C appears instead of the range. A driver's attention to the road must always be his/her primary focus when driving. For your safety and the safety of others, we recommend that you pull over to a safe location and stop before placing or taking a telephone call. If you choose to use the telephone while driving, please use the handsfree device and only use the telephone when weather, road and traffic conditions permit. Some jurisdictions prohibit the driver from using a mobile phone while driving a vehicle. Bear in mind that at a speed of just 30 mph (approximately 50 km/h ), your vehicle is covering a distance of 44 feet (approximately 14 m) every second. X Switch on the mobile phone and COMAND APS (see the separate operating instructions). X Press V or U on the steering wheel to select the Telephone menu. You will see one of the following display messages in the multifunction display: RReady or the name of the network provider: the mobile phone has found a network and is ready to receive. RNo Service: No network is available. Displaying the current fuel consumption X Press V or U on the steering wheel to select the trip computer menu. X Press & or * to select Consumption. The current fuel consumption is displayed. Accepting a call If someone calls you when you are in the Telephone menu, a display message appears in the multifunction display, for example: Telephone menu Introduction You can establish a wireless connection to COMAND APS (see the separate operating instructions). Bluetooth® X Press 6 on the steering wheel to accept an incoming call. If you are not in the Telephone menu, you can still accept a call. Z On-board computer and displays G Warning