2011 Mercedes R-Class Owner's Manual - Page 297
2011 Mercedes R-Class Manual
Page 297 highlights
Where will I find...? 295 : Lug wrench ; Electric air pump = Instructions on the installation position of ? A B C D E F G X Turn retaining screw : counter-clockwise and out of tool holder = and remove it. X Collapsible spare wheel Removing the collapsible spare wheel The collapsible spare wheel can be found in the stowage well under the cargo compartment floor. X Lift the cargo compartment floor up (Y page 294). X Turn tool holder = approximately 180°, so that the electric air pump points backwards. X Remove tool holder = from collapsible spare wheel ;. X Remove collapsible spare wheel ; from the emergency spare wheel well. For further information on changing a wheel and mounting the spare wheel, see (Y page 301). Stowing a used collapsible spare wheel Take the following steps to stow a used collapsible spare wheel. It will otherwise not fit in the spare wheel well. Mercedes-Benz recommends that you have this work carried out at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. Remove the jack from the tool holder (Y page 294). ! Only place the collapsible spare wheel in the vehicle when it is dry. Otherwise, moisture may get into the vehicle. X X Unscrew the valve cap from the valve. If possible, unscrew the valve insert from the valve and release the air. Z Roadside Assistance the vehicle tool kit holder Fuse allocation chart Alignment bolt Folding wheel chock Towing eye Wheel bolts Stowage well Ratchet ring spanner Jack i If retaining screw : does not come out immediately, turn tool holder = slightly counter-clockwise. Retaining screw : can then be unscrewed with ease.