Adaptec 5325301656 Administration Guide - Page 157

Off-the-Shelf Backup Solutions for the Snap Server Installing the Symantec NetBackup v6.5 Client Note This procedure assumes that you are using the default Snap Server configuration; and you have created a directory called agent (to which to copy your agent/client files) on the default share (SHARE1), such that the path to the directory is /shares/SHARE1/agent. To install the Symantec NetBackup v6.5 Client, do the following: Prepare the Snap Server 1 Connect to the server over SSH. Note SSH v2 is required. If you fail to connect to the server, ensure that your SSH client is configured to connect via SSH v2. 2 Log in as admin (using the password for the admin account). 3 You are placed into the CLI shell. However, a standard Linux shell must be used to install the agent. To launch a shell, type the following command and press Enter: osshell 4 Change to root by entering the following command: su Give the root password (same as admin password). 5 Select a volume on which to put a directory called openv. Note If you later delete the volume the openv directory is on, you will need to reinstall the agent. cd /hd ls [lists all the volumes] df -h [shows volume usage] 6 Determine which volume has the most available space by looking at the Avail column in the volume usage table. Change directory to the volume with the most available space. cd [volumename] where [volumename] is the name of the volume with the most available space. ls [lists what is on that volume] 7 Create a directory called openv on that volume: mkdir openv Appendix A Backup and Replication Solutions 143