Adaptec 5325301656 Administration Guide - Page 181
Disk Drive LEDs, Power LED, System LED, LAN 1 and LAN 2 LEDs, Status LED left, Activity LED right
![]() |
UPC - 753253016563
View all Adaptec 5325301656 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
The Meaning of LED Indicators The LEDs operate as described in the following tables: Power LED Solid green Off The server is powered on. The server is powered off. System LED Double-blink green Triple-blink green Solid or blinking amber at boot time Blinking amber during normal operation Blinking amber and green The server is booting up. The server is shutting down. A problem was detected. The server will not boot. A thermal or other system problem was detected The server is in Maintenance Mode. LAN 1 and LAN 2 LEDs Solid green Off The server is active and connected to the network on the network port. The port is disconnected or the Ethernet cable is not connected or linked to an active switch. Disk Drive LEDs Disk drive LEDs on these Snap Servers are located at the base of the bezel. The left light indicates drive status. The right light indicates drive activity. They operate as follows: Status LED (left) Solid green Solid green Solid amber Off Activity LED (right) Off Blinking green Off Off Disk drive installed properly but is not active Disk drive installed properly and is active Disk drive installed, but not working correctly No disk drive installed Appendix C Troubleshooting Snap Servers 167
![](/manual_guide/products/adaptec-5325301656-administration-guide-cfc8252/181.png)