Adaptec 5325301656 Administration Guide - Page 161

Off-the-Shelf Backup Solutions for the Snap Server copy the backup to the original using the command cp /etc/profile.nwbk / etc/profile and then edit the file again. 12 To implement the changes, enter the following command: source /etc/profile Install the EMC Legato Networker Client 1 Connect to the Snap Server via SSH, and log in as admin, using your admin user password. Note SSH v2 is required. If you fail to connect to the server, ensure that your SSH client is configured to connect via SSH v2. 2 You are placed into the CLI shell. However, a standard Linux shell must be used to install the agent. To launch a shell, type the following command and press Enter: osshell 3 To change to superuser, enter the following command, and press Enter: su 4 At the prompt, enter the admin user password, and press Enter. 5 Use the cd command to change to the directory in the share, for example: cd /shares/SHARE1/agent 6 To unpackage the client files, enter the following commands: tar xvfz nw_linux86.tar.gz 7 To install the NetWorker Agent rpm, enter the following command: rpm -Uvh --nodeps --relocate=/usr/=/hd/vol_mnt[X]/NetWorker/usr/ lgtoclnt-x.x-x.i686.rpm where vol_mnt[X] is the NetWorker installation target volume and x.x-x is the version number. 8 To start the EMC Legato NetWorker daemon, enter the following command at the console: /etc/rc.d/init.d/networker start The NetWorker client is now installed. 9 Close the SSH client, return to the Administration Tool, and do the following: a To disable SSH on the Snap Server, navigate to the System > SSH screen, clear the Enable SSH checkbox, and then click OK. SSH is immediately disabled. b To start the newly installed backup agent, navigate to the Maintenance > Shutdown/Restart screen, and click Restart. Appendix A Backup and Replication Solutions 147