Adaptec 5325301656 Administration Guide - Page 178
Power LED, System LED, LAN 1 and LAN 2 LEDs, Unit ID UID Front, and Back LEDs
![]() |
UPC - 753253016563
View all Adaptec 5325301656 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
The Meaning of LED Indicators Disk Drive LEDs are below the status lights, and the indentification (Unit ID) LED is to the right of the LCD display. The LEDs operate as described in the following tables: Power LED Solid green Off The server is powered on. The server is powered off. System LED Double-blink green Triple-blink green Solid or blinking amber at boot time Blinking amber during normal operation Blinking amber and green The server is booting up. The server is shutting down. A problem was detected. The server will not boot. A thermal or other system problem was detected. The server is in Maintenance Mode. LAN 1 and LAN 2 LEDs Solid green Off The server is active and connected to the network. The port is disconnected or the Ethernet cable is not connected or linked to an active switch. Unit ID (UID) Front and Back LEDs Blue Off Unit ID is on and identifies the unit (front and back). Unit ID has not been turned on. 164 Snap Server Administrator Guide
![](/manual_guide/products/adaptec-5325301656-administration-guide-cfc8252/178.png)