Adaptec 5325301656 Administration Guide - Page 27
To Connect to a Snap Server Using SSM, Install and launch Snap Server Manager.
![]() |
UPC - 753253016563
View all Adaptec 5325301656 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Connecting to the Server for the First Time 2 Connect to the server. In a Web browser, enter the following URL: http://SNAPnnnnnn (where nnnnnn is the server number) Press Enter. The Web View screen opens. 3 Log into the Administration Tool. Click the administration link, and in the login dialog box, enter admin as the user name and admin as the password, and then click OK. 4 Complete the Initial Setup Wizard. For instructions for using the Initial Setup Wizard, see page 14. To Connect to a Snap Server Using SSM 1 Install and launch Snap Server Manager. Install and launch SSM (see page 9) on a machine residing on the same network segment as your Snap Server(s). Upon startup, SSM displays the IP address of each Snap Server on its local network segment. 2 If using a DHCP server, skip to the next step. Otherwise: In the SSM console, right-click a server name and select Set IP Address. At a minimum, enter an IP address for the Snap Server and a subnet mask, and then click OK. 3 Launch the Administration Tool from the SSM console. In the SSM console, right-click a server name and select Launch Web Administration. 4 Log into the Administration Tool. Click the administration link, and in the login dialog box, enter admin as the user name and admin as the password, and then click OK. 5 Complete the Initial Setup Wizard. For instructions for using the Initial Setup Wizard, see the next section. Chapter 1 Administrative Overview 13
![](/manual_guide/products/adaptec-5325301656-administration-guide-cfc8252/27.png)