Adaptec 5325301656 Administration Guide - Page 176
Snap Server 410 Status and Drive Light Behavior, Power, System, and LAN LEDs, Power LED, System LED
![]() |
UPC - 753253016563
View all Adaptec 5325301656 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
The Meaning of LED Indicators Snap Server 410 Status and Drive Light Behavior The server has two status lights, two network lights, and two lights for each of the four disk drives, as shown in the following illustration: Power LED System LED LAN LEDs Disk Drive LEDs Adaptec recommends that you become familiar with the operation of these lights. Power, System, and LAN LEDs These status lights are located to the right of the power button. Looking at the server from the front, the lights appear in the following order, from left to right: power LED, system LED, LAN 1 (Ethernet1) LED, and LAN 2 (Ethernet2) LED. The Disk Drive LEDs run along the bottom of the bezel, two LEDs for each disk drive. The LEDs operate as described in the following tables: Power LED Solid green Off The server is powered on. The server is powered off. System LED Blinking green Blinking amber Blinking amber and green The server is operating normally. A thermal or other system problem was detected. The server is in Maintenance Mode. 162 Snap Server Administrator Guide
![](/manual_guide/products/adaptec-5325301656-administration-guide-cfc8252/176.png)