Alpine PXA-H800 Owners Manual - Page 20

From a PC

Get Alpine PXA-H800 PDF manuals and user guides View all Alpine PXA-H800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

From a PC 20 Select and click the memory where the curve is to be saved from [lmprintEQ Memory 1] or [lmprintEQ Memory 2]. Click [OK]. • Select [File] to save ImprintEQ measurement data on a PC. Refer to "Saving ImprintEQ Measurement Data on a PC" (page 19). 21 Click [Close Window]. • To enable this function, Defeat should be is set to ON. • Graphic EQ, Parametric EQ and X-Over Level are set to their initial values during lmprintEQ measurement. • The file extension of the ImprintEQ setting data file is ".ieq". • When you save the measurement result ofImprintEQ in Memory 1 or 2 for the second time, the memory will be overwritten and the previous data will be lost. • Sound may arrive at the listening position at slightly different times, depending on the speaker and enclosure. To compensate for this, the distance can be adjusted to be larger than the actual distance. • Measurement values will not be lost in the event the system is reset or battery power is disconnected. • After the setting, it is recommended to store the setting contents on the unit. For details, refer to "Storing the Preset Values (Preset Store)" (page 12). Saving lmprintEQ Measurement Data on a PC 1 Click [File] in Step 20 for "Setting lmprintEQ", and click [OK]. The "Save As" box will be shown. 2 Select the location where you want to save the file and enter a name for the file to save. • For the method to load the data saved on a PC, refer to "Loading the ImprintEQ Measurement Data (File)" (page 11 ). Adjusting and Saving the Target Curve You can adjust the target curve and save it on a PC. 1 Click [Target Curve Setting] in Step 17 for "Setting lmprintEQ." The Target Curve Setting screen will be displayed. • When you click [Target Curve] for the [Shortcut] tab in the main menu, the Target Curve Setting screen will be displayed. 2 Drag the curve to adjust it. Turning lmprintEQ On/Off 1 Click [lmprintEQ] for [Shortcut] tab in the main menu. The Automatic Measurement tab screen will be displayed. • When you click [Automatic Measurement] in the Function switching tab, the Automatic Measurement tab screen will also be displayed. Refer to "Operating the Function Switching Tab" (page 7). 2 Click [ON] or [OFF] for "lmprintEQ." If you click [ON], select the setting value. 3 Click [T] and select and click either [Memory 1] or [Memory 2]. ALPINE PXA-HSOO

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
20
Select and click the memory where the curve is to be
saved from [lmprintEQ Memory 1] or [lmprintEQ
Memory 2]. Click [OK].
•
Select [File] to save ImprintEQ measurement data on a
PC.
Refer
to
"Saving ImprintEQ Measurement Data on a
PC"
(page 19).
21
Click [Close Window].
•
To
enable this function, Defeat should be is set
to
ON.
•
Graphic
EQ,
Parametric EQ and X-Over Level are set
to
their initial
values during lmprintEQ measurement.
•
The file extension
of
the ImprintEQ setting data file is ".ieq".
•
When you save the measurement result
of
ImprintEQ
in
Memory 1
or
2
for the second time, the memory will be overwritten and the
previous data will be lost.
•
Sound may arrive at the listening position at slightly different times,
depending
on
the speaker and enclosure.
To
compensate
for
this, the
distance can be adjusted to be larger than the actual distance.
•
Measurement values will not be lost in the event the system
is
reset
or
battery power is disconnected.
Turning lmprintEQ On/Off
1
Click [lmprintEQ] for [Shortcut] tab
in
the main
menu.
The Automatic Measurement tab screen will be displayed.
•
When you click [Automatic Measurement]
in
the Function switching
tab, the Automatic Measurement tab screen will also be displayed.
Refer
to
"Operating the Function Switching Tab" (page
7).
2
Click [ON] or [OFF] for "lmprintEQ."
3
If you click [ON], select the setting value.
Click
[T]
and select and click either [Memory 1] or
[Memory 2].
ALPINE
PXA-HSOO
<:'•Hill<'
M<lll<i<J<71
-X
•
If
you
do
not use ImprintEQ is not used, select [OFF].
•
If
the speaker system
in
the "Memory" and the current speaker
system do not match, the Memory cannot be retrieved.
•
When you
tum
on 1mprintEQ, the Graphic EQ, Parametric
EQ,
Time
Correction, and Output Level are automatically adjusted. Each
of
these values can be further adjusted, but the adjustment ranges
for
the Graphic EQ and the Parametric EQ are restricted.
•
When ImprintEQ is
on,
the Time Correction and X-Over channel will
be automatically set at the
UR
Separate Adjustment mode.
From a PC
•
After the setting, it
is
recommended
to
store the setting contents on
the unit.
For
details, refer
to
"Storing the Preset Values (Preset
Store)" (page 12).
Saving lmprintEQ Measurement Data on a
PC
1
Click [File]
in
Step 20 for "Setting lmprintEQ", and
click [OK].
The "Save As" box will be shown.
2
Select the location where you want to save the file
and enter a name for the file to save.
•
For
the method
to
load the data saved on a
PC,
refer to "Loading the
ImprintEQ Measurement Data (File)" (page
11
).
Adjusting and Saving the Target Curve
You
can adjust the target curve and save it on a PC.
1
Click [Target Curve Setting]
in
Step 17 for "Setting
lmprintEQ."
The Target Curve Setting screen will be displayed.
•
When you click [Target Curve] for the [Shortcut] tab in the main
menu, the Target Curve Setting screen will be displayed.
2
Drag the curve to adjust
it.
Setting contents:
-6
to +6dB
3
Click [Save].
The "Save As" box will be shown.
4
Select the location where you want to save the file
and enter a name for the file to save.
•
The file extension
of
the measurement data file is ".tcv".
•
You
can retrieve the saved data by clicking [Load].
•
To
restore the target curve
to
the initial settings, click [Reset]. Click
[OK] when confirmation message appears.
•
Mouse trace function
When you click [Mouse Trace OFF], the mouse trace function
becomes enabled, and [Mouse Trace OFF] changes
to
[Mouse Trace
ON]. When dragged, the curve (settings) changes
in
accordance with
the movement
of
the cursor.
To
disable the mouse trace function, click the [Mouse Trace ON].
19-EN