Alpine PXA-H800 Owners Manual - Page 71
Mounting the Microphone. - owner s manual
View all Alpine PXA-H800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
5 Tightly install the bracket® at the designated paper template position with the 4 self-tapping screws (M4 x 14mm)@. ../ Self-tapping screw l (M4 x 14 mm) (x4) T i Bracket(x4 l Mounting the Microphone. When measuring JmprintEQ or AutoTCR before implement ing RoadEQ automated measurement, the installation position is different. Before insta lling the m icrophone, make sure to refer to "Automatic Measurement Function" in the Owner's Manual- PC or Commander guide. For safe use, make sure ofthe following: • location is stable and firm. • driver's view and operations are not obstructed. • Mount the road noise measurement microphone on the sun visor, dashboard or roof interior. • Installation on the sun visor is the most common installation position to measure road noise while driving. • Do not install the unit or wiring in a location that interferes with driving or an air bag. Mount the brackets symmetrically along the paper template. 6 Remove the paper template. 7 Place the Base unit on the bracket® and install the device tightly with the 4 screws (M3 x 6 mm) (f). Base Unit .. 1 Screw (M3 x 6 mm) • The mounting clip can be removed from the microphone base, as in the illustration below. If you mount the microphone using the base without the clip, use the supplied adhesive tape as needed. Microphone base Clip / -(0 Adhesive tape 4-EN