Alpine PXA-H800 Owners Manual - Page 72
Mounting, Commander, Sold separately
View all Alpine PXA-H800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Mounting the Commander Unit (RUXCSOO) (Sold separately) Preparation 1 Check accessory parts. CD Commander cable (5 m) ® Commander unit holder @ Bracket ' '(x2) ® Self-tapping screw (M4x14mm) @ Screw (M3 x 6 mm) (x2) @ Adhesive sheet (1 set) (x4) Installing with Commander unit holder • Set the installation location. • Check that the provided cord is sufficiently long. Install the unit where it is not exposed to water. Do not install the unit or wiring where it interferes with driving or an air bag. • Console or dashboard, etc. * Remove the components to which this product will be installedfrom the automobile before installing. 1 Cut out the external box paper template along the perforation. 2 Temporarily hold the paper template in place at the installation position with adhesive tape. 3 Cut installation holes along the paper template with a utility knife. LhwARNING When making holes, be careful not to damage pipes, tanks, electric wires, etc. Doing so could lead to accidents or fire. Installing with Adhesive sheet • Set the installation location. • Check that the provided cord is sufficiently long. Install the unit where it is not exposed to water. Do not install the unit or wiring where it interferes with driving or an air bag. 1 Using the Adhesive sheet (a) @, install on the console or dashboard. Console or Dashboard etc. LhcAUTION If the installation holes are too big, the Commander unit can rattle or come off while driving. Make sure to use the paper template. 5-EN