Alpine PXA-H800 Owners Manual - Page 35
Euphony
View all Alpine PXA-H800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
From a PC • Avoid stopping, pausing, switching the disc, cueing,fast-forwarding or switching the audio channel ofthis unit while making this adjustment. The setting is cancelled if the decode mode is switched. • When the Rear speaker is off in "Setting the Speaker System (Output System Select)" (page 13)1 "Setting the Speakers (Speaker Setup)/ Setting the Subwoofers" (page 14), this item cannot be set. • Effective onlyfor Dolby Pro Logic l/, EUPHONY and DTS (with rear signal). Turning on this function sends the Center channel low frequencies, equally to the front Left and Right speakers. This enhances the overall sound when using a small center speaker. This is used when the center speaker has a small diameter and cannot produce low frequency sounds. (Initial setting: "OFF", "315Hz") 1 Click [ON] of "Center Bass Split." Center Bass Split Frequency 01·1 , .t;:rEf~ : I~ Hz ~ Turning this feature on mixes the audio signals output from the rear speakers with the front audio signals. 2 Click [T] for "Frequency" and select and click a frequency you want from the pull-down menu. Frequency: 200 Hz/225 Hz/250 Hz/280 Hz/315 Hz/350 Hz/400 Hz/450 Hz/500 Hz • Avoid stopping, pausing, switching the disc, cueing, fast-forwarding or switching the audio channel ofthis unit while making this adjustment. The effect may not be recognized easily depending on the decoding conditions. • When the Center speaker is offin "Setting the Speaker System (Output System Select)" (page 13)1 "Selling the Speakers (Speaker Setup)/Setting the Subwoofers" (page 14), this item cannot be set. • Effective only for Dolby Pro Logic II. EUPHONY and DTS (with Center signal). The output can be set to 2 or 3 channels when playing discs recorded in linear PCM. (Initial setting: "2ch") 1 Click [T] for "PCM Mode" and click either [2ch] or [3ch] from the pull-down menu. 1_1 dE· PCM Mode Setup ~ ~ h ...,. 2ch: 2ch Output (L!R) 3ch: 3ch Output (L!R/CENTER) • When the Center speaker is offin "Setting the Speaker System (Output System Select)" (page 13)/ "Setting the Speakers (Speaker Setup)/Setting the Subwoofers" (page 14), this item cannot be set. With Dolby Digital, the dynamic range is compressed so that powerful sound can be achieved at regular volume levels. This compression can be cancelled to achieve an energetic sound with even greater power, like the sound in a movie theater. This function works only in the Dolby Digital mode. (Initial setting: "Standard") 1 Click [T] for "Listening Mode" and click either [Standard] or [Maximum] from the pull-down menu. (' Listening Mode Setup St >nd ar j ..,. 1 D\ D Lev el S~"t~a'.n"d'a"t"d'' Standard: To enjoy the dynamic sound at regular volume Maximum: To enjoy the dynamic sound at maximum volume • This feature is effective only for Dolby Digital. • Use this feature at a volume level at which you can still hear sound outside of the cabin. • Depending on the types ofsource, such as DVD software, this feature may be ineffective. The volume level for Dolby Digital, Dolby Pro Logic II, DTS, EUPHONY and PCM modes can be set. (Initial setting: "±OdB") 1 Click [T] for "DVD Level" and select and click the level of mode you want from the pull-down menu. DVD Level Level Dolby Digital +2 dB ..... Dolby Pro Logic II +4 dB ..... E: DTS D •:JB .... PCM EUPHONY ..Cl dB .... [I,:JB Adjustment modes: Dolby Digitai/Dolby Pro Logic 11/DTS 1 PCM/EUPHONY Level: -10 to + 10 dB (in 1 dB steps) • Avoid stopping, pausing, switching the disc, cueing, fast-forwarding or switching the audio channel ofthis unit while making this adjustment. The effect may not be recognized easily depending on the decoding conditions. 34-EN