Alpine PXA-H800 Owners Manual - Page 25
Click [Show All Data].
View all Alpine PXA-H800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
From a PC 5 Click a frequency and drag up or down to adjust the level . • After the setting, it is recommended to store the setting contents on the unit. For details, refer to "Storing the Preset Values (Preset Store)" (page 12). Displaying the data 1 Click [Show All Data]. The setup values for all the channels will be displayed . Frequency: Front/Rear/Center: 20Hz-20kHz (1/3 octave step) (1 to 31 Band) SubW: 20Hz to 160Hz (1/3 octave step) (1 to 10 Band) Level: -12 to + 12dB (in 0.5dB step)* * When lmprintEQ is enabled, -6 to +6 dB (in 0.5 dB steps) • Mouse trace function When you click [Mouse Trace OFF], the mouse trace function becomes enabled, and [Mouse Trace OFF] changes to [Mouse Trace ON]. When dragged, the curve (settings) changes in accordance with the movement of the cursor. To disable the mouse trace function, click the [Mouse Trace ON]. • You can also make adjustments by operating the settings indication area (Frequency, Level). The current setup value will be displayed at the bottom ofthe Screen. Click [ '1/ff ] and select and click a setup value. You can also use the [Tab], [ f j }, and [ j. ] keys on your PC to select the setup value. l ch Band 8:>rd1~ Frequency 41100Hz ,. level •ltll d8 ,. Q Factor t:Q Band R ch. B::~nd1 4 Frequency 4rt1J u H;: Level +! 11 0 d8 0 Factor & 0 6 To adjust another channel, repeat Steps 4 through 5. • You can listen with Defeat OFF (adjusted setup values) or with Defeat ON (Initial value) to compare, by clicking either [ON] or [OFF] of "Defeat" in the main menu while in the adjustment mode. • By clicking either ! I l l or fil l of "Mute" while in the adjustment mode, you can mute the selected channel. 7 When setting is complete, click [Close Window]. • To enable this function, Defeat should be is set to ON. • To restore the channel which is currently being adjusted to the default, click [Ch. Flat]. To restore all the channels to the initial settings, click [All Reset]. Click [OK] when each confirmation message appears. • When the speaker is set to the "OFF" mode, the graphic equalizer for that speaker cannot be set. Refer to "Setting the Speaker System (Output System Select)" (page /3)/ "Setting the Speakers (Speaker Setup)/Setting the Subwoofers" (page 14). • Check the playable frequency ranges of the connected speakers before making equalizer adjustments. If the speaker's playable frequency range is 55 Hz to 30kHz, for example, adjusting the 40Hz or 20 Hz band has no effect. Additionally, you may overload and damage the speakers. 24-EN