Apple IMAC User Manual - Page 114
IrDA Problems, Symptom Charts/ IrDA Problems - 32
UPC - 067540444435
View all Apple IMAC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Troubleshooting Symptom Charts/ IrDA Problems - 32 IrDA Problems Two infraredequipped units are unable to communicate via their infrared communication panels to transfer data or commands. 1 Clean infrared window with soft, lint-free cloth. 2 Make sure units are spaced greater than three feet but less than six feet and at less than a twenty degree angle. 3 Verify infrared signal is being received by host computer. 4 Open the IrDA control panel and make sure "Auto Connect" is selected. 5 Refer to the Basics chapter in this manual for an overview of IrDA compatibility with the iMac computer. 6 Replace IrDA board. 7 Reseat/replace the IrDA cable that connects the IrDA board to the A/V interconnect board. 8 Reseat/replace the IrDA cable that runs between the A/V interconnect board and the logic board. 9 Replace the A/V interconnect board. 1 0 Replace the logic board.