Asus M8 M8000 English - Page 51
IR Wireless Communication
View all Asus M8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
4. Using IR Wireless Communication The Notebook PC is equipped with an Infrared (IR) Communication Port located on the rear side. The IR port comes with IrDA Serial Infrared Data Link Version 1.1 compliance, which allows you to perform point-to-point wireless communications. You can use a SIR/FIR-specified application to transmit or receive data files with other systems equipped with an infrared port. You must set these modes in the BIOS before you start to install the IR driver and file-transferring applications. FIR (Fast Infrared) supports up to 4Mbps and SIR (Serial Infrared) supports up to 115.2Kbps. Guidelines for using IR communication Follow the guidelines listed below when using the Infrared (IR) Communication: • Make sure the IR Mode in the BIOS Setup is properly set to the mode you would like to use. • The angle between two Infrared Communication Ports should not exceed (±15˚). • The distance between the Notebook PC's IR and target device IR should not exceed 40 inches (1 m). • Do not move either the Notebook PC or the other device during transmission of data. • An error may occur if IR transmission is conducted in an environment with high levels of noise or vibration. Enabling Infrared Infrared communication must be enabled in MS Windows. Right click on the infrared icon on the Windows taskbar and select "Enable infrared communication." When infrared communication is enabled, moving the cursor over the icon will give its status. IMPORTANT: Disable the infrared communication when you are not using the IR for long periods because the IR consumes a great deal of Windows resources which will decrease the Notebook PC's performance. 51