Bowflex Power Pro Assembly Manual - Page 10

Leg Extension Attachment The Bowflex Leg Extension Attachment is an optional attachment. Depending on the Assembly Instructions machine and accessories you ordered, this attachment may or may not be included. Thank you for choosing the Bowflex Leg Extension Attachment. This attachment comes complete in one box, with everything you need to assemble your new accessory. Before you begin, you will need a crescent wrench, a 5/16" open end wrench. (It is helpful to have the crescent wrench to hold one end of a bolt while tightening with the other). Please follow these assembly instructions carefully. If you experience any difficulty, please call a Bowflex customer service representative for assistance at 1-800-269-3539. Components for this assembly are in a box labeled Leg Extension Attachment Box Contents 1 Leg Extension Main Frame (with pre-attached pulleys (2) and left & right brackets.) 1 Leg Extension Pivot Arm 1 Leg Extension Foot 1 Seat (with four "L" brackets attached) 3 Metal Tubes 6 Foam Pads 2 68" Cable 1 Parts/Bolt Bag (See parts & bolt bag identification page) Name: 3/4" End Cap Part #: 90218 Quantity: 6 Name: 5/16" Nylon Lock Nut Part #: 80105 Name: 1/4" L Pin Quantity: 4 Part #: 90268 Quantity: 1 Name: 5/16" x 2" Hex Head Bolt Part #: 90252 Quantity: 4 Name: M10 Allen Head Bolt Part #: 90237 Quantity: 1 Name: Rubber Bumper Bolt Part #: 80151 Quantity: 1 Name: Allen Wrench Part #: 90238 Quantity: 1 Name: M10 Nylon Lock Nut Part #: 90236 Quantity: 1 11