Bowflex Power Pro Assembly Manual - Page 26
Expanding Your Bowflex With Extra, Power Rods
 |
View all Bowflex Power Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Expanding Your Bowflex With Extra Power Rods To expand your Bowflex from 210 lbs to 310 lbs: Step 1: Remove your Power Rod pack by removing the four screws on the back of the Base. To expand your Bowflex from 310 lbs. to 410 lbs.: Step 1: Simply slide in new rods to the back of the Power Rod Base. Make sure new Rods are fully seated into Base before using. Step 2: Step 3: Remove plugs in the first two holes of the Base of the Power Rod pack. Insert Power Rods into holes. Make sure that slot on bottom of Rods matches up with ridges in bottom. of hole. Step 4: Secure rod with supplied screw by screwing into the bottom of Power Rod. Replace Power Rod assembly and secure with the four screws. 27
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21 -
22 -
23 -
24 -
25 -
26 -
27
 |
 |
Step 1:
Remove your Power Rod pack by removing the four
screws on the back of the Base.
Step 2:
Remove plugs in the first two holes of the
Base of the Power Rod pack.
Step 3:
Insert Power Rods into holes. Make sure that slot on bottom of Rods
matches up with ridges in bottom. of hole.
Step 4:
Secure rod with supplied screw by screwing into the bottom of Power Rod.
Replace Power Rod assembly and secure with the four screws.
To expand your Bowflex from 210 lbs to 310 lbs:
Expanding Your Bowflex With Extra
Power Rods
Step 1:
Simply slide in new rods to the back
of the Power Rod Base. Make sure new Rods are
fully seated into Base before using.
To expand your Bowflex from
310 lbs. to 410 lbs.:
27