Bowflex Power Pro Assembly Manual - Page 9
Step 8 - chest bar attachment
View all Bowflex Power Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Step 8: Place Bench onto the Bowflex. Unwrap Cables and Pulleys. Locate Nonskid Pads. Remove paper backing to expose the adhesive surface. Adhere Nonskid Pads to Pulley Frame as shown. Note: If you installed a CHEST BAR Attachment, please go to page 16, step 8. Place Nonskid Pads here (facing top) Components for this assembly are in Box 2 Hook Hand-Grips into place by inserting D-Ring into Snap Hook on end of cables. D-Ring Cable 10
Place Nonskid Pads here (facing top)
Step 8:
Place Bench onto the Bowflex.
Unwrap Cables and Pulleys. Locate Nonskid
Pads. Remove paper backing to expose the
adhesive surface. Adhere Nonskid Pads to
Pulley Frame as shown.
Note:
If you installed a CHEST BAR Attachment,
please go to page 16, step 8.
Hook Hand-Grips into
place by inserting
D-Ring into Snap Hook
on end of cables.
D-Ring
10
Cable
Components for this
assembly are in Box 2