Bowflex Power Pro Assembly Manual - Page 20

Components for this assembly are in a box labeled Lat Pulldown Attachment Upper Main Frame Step 6: Locate Upper Main Frame. Slide upper half onto lower half. Insert the 1/4" x 3 1/2" Hex Head Bolts through holes and tighten with 1/4" Lock Nuts. 1/4" Lock Nuts 1/4" x 3 1/2" Hex Head Bolts 3/8" Nylon Locknut "T" Piece NOTICE: For shipping purposes, the Lat Bar Rest brackets have been turned to the sides. Notice their correct positioning in the diagram to the left. Rotate brackets to their correct positions and tighten nuts before using. 3/8" x 3 1/2" Hex Head Bolts Upper Main Frame #10 Screw Plastic Bumper Main Frame Lower Half Step 7: Locate the "T" Piece with the attached Pulleys. Insert the "T" into the top end of the Upper Main Frame as pictured. Insert two 3/8" x 3 1/2" Hex Head Bolts into the two corresponding holes, through the main frame and the "T" Piece. Tighten with the provided Nylon Lock Nuts. Make sure the "T" Piece is level before tightening nuts all the way. Locate Plastic Bumper and #10 Screw. Place Bumper over Lower and Upper Main Frame connection. Use #10 Screw to hold Bumper in place. 21