Bowflex Power Pro Assembly Manual - Page 15

Step 5: Position your Chest Bar upright and insert to the machine frame where you just removed the U-Bar. Step 6: Line up holes on machine and Chest Bar. Using the nuts and bolts that you previously removed in Step Two, attach Chest Bar to machine frame. Tighten securely. Note: Once you finish installing your chest bar, go back to page 8, step 4 and continue assembling your Bowflex. Step 7: Replace the Vertical Main Frame with Rod Pack that you removed in step two. Secure with bolts that were set aside. Components for this assembly are in a box labeled Chest Bar Attachment Step 8: Find existing pulley on U-Bar that you removed. They are connected to frame using a J-Bolt and a Nylon Lock Nut. Remove nut from bolt. When finished simply pull up J-bolt to remove. 16 Remove Nylon Lock Nut