Brother International 9870 Service Manual - Page 100
screwdriver until it snaps into place as shown below.
View all Brother International 9870 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
(6) For models available with a 2nd paper cassette: Pull the 2nd cassette relay PCB bracket to take out its harness. Remove the screw and take off the 2nd cassette relay PCB from its bracket. n Reassembling Notes • Before reinstalling the high-voltage power supply PCB, push in the spring with a flat screwdriver until it snaps into place as shown below. • Before reinstalling the high-voltage power supply PCB, check the high-voltage contacts for any toner particles, paper dust or dirt, and clean them out. IV - 54
IV
- 54
(6)
For models available with a 2nd paper cassette:
Pull the 2nd cassette relay PCB bracket to
take out its harness.
Remove the screw and take off the 2nd cassette relay PCB from its
bracket.
n
Reassembling Notes
•
Before reinstalling the high-voltage power supply PCB, push in the spring with a flat
screwdriver until it snaps into place as shown below.
•
Before reinstalling the high-voltage power supply PCB, check the high-voltage contacts for any
toner particles, paper dust or dirt, and clean them out.