Brother International 9870 Service Manual - Page 50
Lower Rear Cover, 1.2 Access Plates R and F, Take out access plates R and F together.
View all Brother International 9870 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
1.1 Lower Rear Cover (1) Remove the three screws (two "a" and one "b") from the lower rear cover. Screw "b" is provided on those models available with a 2nd paper cassette (as an option). (2) Lightly pressing sections "X," pull out the lower rear cover. "a" and "b": Screw, pan (washer) M4x10DB 1.2 Access Plates R and F (1) Remove screw "c" that secures access plates R and F together to the main chassis. (2) Remove screws "d" and "e" from access plate R. (3) Take out access plates R and F together. (4) Remove screw "f" to separate those access plates. n Reassembling Notes "c" to "f": Taptite, cup S M3x6 (Tightening torque: 0.5 N•m) • When reinstalling access plate F, fit the two tabs provided on the front end underneath the center edge of the main chassis. IV - 4