Brother International 9870 Service Manual - Page 177

[ 2 ] Error codes shown in the \, Engine PCB error. - machine error 76

Page 177 highlights

[ 2 ] Error codes shown in the "MACHINE ERROR X X " message Error Code X X (Hex.) ( 71 ( 72 ( 73 ( 74 ( 75 ( 76 ( 77 ( 78 ( 79 ( 7A ( 7B ( 7C ( 80 ( 82 ( 83 ( 84 ( 85 ( 86 ( 88 ( A1 ( A2 ( A3 ( A4 ( A7 ( A8 ( A9 ( AC Error factor Polygon motor does not synchronize with the reference clock. ) Cannot detect Beam Detect signal. ) No toner cartridge loaded. ) Toner empty. ) In-casing temperature error. ) Heater harness disconnected or broken. ) Heater thermistor short circuit.) Heater thermistor harness disconnected or broken. ) In-casing temperature sensor harness disconnected or broken. ) Main motor does not synchronize with the reference clock. ) ASIC error on the main PCB. ) Engine PCB error. ) Paper size setting error. ) Paper feeding error. ) Paper jam. The registration sensor, 2nd registration sensor, and/or manual insertion sensor remains ON.) Paper jam. The paper ejection sensor remains ON. ) No paper cassette loaded. ) No 2nd paper cassette loaded. ) Paper jam. Even after the registration sensor has gone OFF, the paper ejection sensor still stays OFF.) Front cover opened. ) Document too long to scan. ) Document not detected by the document rear sensor. ) 50% or more faulty of white level data. ) One-line feeding timeout error. ) One-line scanning timeout error. ) Abnormal scanning reference voltage. ) Less than 50% faulty of white level data. ) Error codes in parentheses do not appear in the "MACHINE ERROR X X", since those errors are displayed as messages described in "[ 1 ] Error messages on the LCD." In the maintenance mode (Function code 82), those error codes may be displayed. VI - 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286

VI
- 4
[ 2 ]
Error codes shown in the "MACHINE ERROR
X X
" message
Error Code
X X
(Hex.)
Error factor
( 71
Polygon motor does not synchronize with the reference clock. )
( 72
Cannot detect Beam Detect signal. )
( 73
No toner cartridge loaded. )
( 74
Toner empty. )
( 75
In-casing temperature error. )
( 76
Heater harness disconnected or broken. )
( 77
Heater thermistor short circuit.)
( 78
Heater thermistor harness disconnected or broken. )
( 79
In-casing temperature sensor harness disconnected or broken. )
( 7A
Main motor does not synchronize with the reference clock. )
( 7B
ASIC error on the main PCB. )
( 7C
Engine PCB error. )
( 80
Paper size setting error. )
( 82
Paper feeding error. )
( 83
Paper jam.
The registration sensor, 2nd registration sensor, and/or manual
insertion sensor remains ON.)
( 84
Paper jam.
The paper ejection sensor remains ON. )
( 85
No paper cassette loaded. )
( 86
No 2nd paper cassette loaded. )
( 88
Paper jam.
Even after the registration sensor has gone OFF, the paper
ejection sensor still stays OFF.)
( A1
Front cover opened. )
( A2
Document too long to scan. )
( A3
Document not detected by the document rear sensor. )
( A4
50% or more faulty of white level data. )
( A7
One-line feeding timeout error. )
( A8
One-line scanning timeout error. )
( A9
Abnormal scanning reference voltage. )
( AC
Less than 50% faulty of white level data. )
Error codes in parentheses do not appear in the "MACHINE ERROR X X
", since those errors are
displayed as messages described in "[ 1 ] Error messages on the LCD."
In the maintenance mode
(Function code 82), those error codes may be displayed.