Brother International 9870 Service Manual - Page 122

WSW No. WSW35 WSW36 WSW37 WSW38 WSW39 WSW40 WSW41 WSW42 WSW43 Firmware Switches (WSW01 through WSW43) Continued Function setting 13 Function setting 14 Function setting 15 Function setting 16 Function setting 17 Function setting 18 Function setting 19 Function setting 20 Function setting 21 Function Reference Page V-44 V-45 V-46 V-47 V-48 V-49 V-50 V-51 V-52 n Operating Procedure (1) Press the 1 and 0 keys in this order in the initial stage of the maintenance mode. The machine displays the "WSW00" on the LCD and becomes ready to accept a firmware switch number. (2) Enter the desired number from the firmware switch numbers (01 through 43). The following appears on the LCD: Selector No. 1 Selector No. 8 ↓ ↓ WSWXX = 0 0 0 0 0 0 0 0 (3) For machines w/ fax: Use the and keys to move the cursor to the selector position to be modified. For machines w/o fax: Use the Job Cancel key to move the cursor to the selector position to be modified. (4) Enter the desired number using the 0 and 1 keys. (5) For machines w/ fax: Press the Set key. For machines w/o fax: Press the Menu key. This operation saves the newly entered selector values onto the EEPROM and readies the machine for accepting a firmware switch number. (6) Repeat steps (2) through (5) until the modification for the desired firmware switches is completed. (7) Press the Stop key to return the machine to the initial stage of the maintenance mode. NOTES: • To cancel this operation and return the machine to the initial stage of the maintenance mode during the above procedure, press the Stop key. • If there is a pause of more than one minute after a single-digit number is entered for double-digit firmware switch numbers, the machine will automatically return to the initial stage of the maintenance mode. n Note The user-accessible selectors of the firmware switches are shaded in the tables given on the following pages. V - 10