Brother International 9870 Service Manual - Page 83
Heat-fixing Unit and FU Lamp, Peel off tape and take off the main-relay motors harness
View all Brother International 9870 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
1.18 Heat-fixing Unit and FU Lamp (1) Remove the screw from the harness duct. The chassis grounding wire also comes off. (2) Peel off tape and take off the main-relay (motors) harness, main-relay (CCD) harness, and VC harness* from the harness duct. (3) Unhook the harness duct from the main chassis in the directions of arrows • and ,. *Provided on models supporting video capture IV - 37
IV
- 37
1.18
Heat-fixing Unit and FU Lamp
(1)
Remove the screw from the harness duct.
The chassis grounding wire also comes off.
(2)
Peel off tape and take off the main-relay (motors) harness, main-relay (CCD) harness, and VC
harness* from the harness duct.
(3)
Unhook the harness duct from the main chassis in the directions of arrows
°
and
±
.
*Provided on models supporting video capture