Brother International BAS-343E Instruction Manual - English - Page 11

Positioning, 3-3. Tilting the sewing machine head, to its original position.

Get Brother International BAS-343E PDF manuals and user guides View all Brother International BAS-343E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

3. Preparation 3-2. Positioning Decide the position for the sewing machine. Loosen nuts of four level adjusters q. Lower the level adjusters and secure them with nuts w. Turning the level adjuster counterclockwise will raise its height and turning it clockwise will lower it. 3-3. Tilting the sewing machine head 1. Remove screws q at the back of the work table, and remove table cover (rear) w. 2. When tilting back the machine head, loosen the bolt t of the control box base and move the control box e to the right so that the needle plate support plate r does not touch the control box e. 3. Remove bolt y. The bolts are used to fix the machine in shipping. Generally they are needless after removing them keep them in another place. 4. Stand at the front of the table and slowly raise the machine u. Then lock i it. 5. When returning the machine to its former position, release lock i. The gas spring will guide the machine to its original position. BAS-343E 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
4
BAS-343E
3. Preparation
3-3. Tilting the sewing machine head
1.
Remove screws
q
at the back of the work table, and
remove table cover (rear)
w
.
2.
When tilting
back the machine head, loosen the bolt
t
of the control box base and move the control box
e
to the right so that the needle plate support plate
r
does not touch the control box
e
.
3.
Remove bolt
y
.
The bolts are used to fix the machine in shipping.
Generally they are needless after removing them keep
them in another place.
4.
Stand at the front of the table and slowly raise the
machine
u
. Then lock
i
it.
5.
When returning the machine to its former position, re-
lease lock
i
. The gas spring will guide the machine
to its original position.
3-2. Positioning
Decide the position for the sewing machine. Loosen nuts
of four level adjusters
q
. Lower the level adjusters and
secure them with nuts
w
.
Turning the level adjuster counterclockwise will raise its
height and turning it clockwise will lower it.