Brother International BAS-343E Instruction Manual - English - Page 24

6-2. Using the floppy disk Compatible types of floppy disk Data type 300E type No. of stitches programmed 20,000 stitches per pattern 100 pattern Up to a maximum of 360,000 stitches Data resolution 0.05 mm/pulse Disk 2HD Tajima embroidery data 50,000 stitches per pattern 0.1 mm/pulse 6. Panel operation Format Write enabled Yes 1.44 MB No Old 300A type Old 300 data 4,000 stitches per patern 10 patterns Up to a maximum of 40,000 stitches 2,000 stitches per pattern 10 patterns Up to a maximum of 20,000 stitches 0.1 mm/pulse 0.2 mm/pulse Yes 2DD Automatically formatted No • The above four types of data can all be read, but when writing to disk, all data is automatically converted to 300E data when writing to 2HD disks and 300A data when writing to 2DD disks. • When using a 2HD disk, use a disk which has been pre-formatted as a 1.44 MB disk. (The programmer can be used to format these disks. Refer to the programmer instruction manual for details.) • TFD embroidery data can be embroidered after it has been converted by the programmer to BAS-300E data. • Restriction on using 2DD floppy disks. In order to maintain compatibility with the old 300A series, the following restrictions have been placed on the use of the new functions which have been added to the E series. Restricted function Resolution A series (2DD) 0.1 mm/pulse E series (2HD) 0.05 mm/pulse Applicable command Low-speed conversion 2 types (400 and 1,200 4 types (400, 600, 800 revolutions) and 1,200 revolutions) [668]L [669]L Split function during embroidering Not available Available [220]L [230]L Needle down stop for split Expansion option output Not available Not available Available Available [221]L [231]L BAS-343E 17