Brother International BAS-343E Instruction Manual - English - Page 12
Connecting the ground wire, 3-5. V-belt tension, 3-6. Installing the foot switch
![]() |
View all Brother International BAS-343E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
3. Preparation 3-4. Connecting the ground wire DANGER Be sure to connect the ground. If the ground connection is not secure, you run the risk of receiving a serious electric shock. Red White Black 3-phase power supply Yellow/Green ......... Connect to ground ˙ Connection method for 3-phase power supply 3-5. V-belt tension These should approximately 10 - 12 mm of slack when Vbelt is loaded at 9.8 N (1 kgf). To adjust, loosen the two nuts q, and shift the motor up or down. 9.8 N 10 - 12 mm 3-6. Installing the foot switch Insert the connector of the foot switch w into the connector e of the control box q. BAS-343E 5
![](/manual_guide/products/brother-international-bas343e-instruction-manual-english-23469cf/12.png)
5
BAS-343E
3. Preparation
Be sure to connect the ground. If the ground connection is not secure, you run the risk of receiving a
serious electric shock.
DANGER
■
Connection method for 3-phase power supply
3-4. Connecting the ground wire
3-6. Installing the foot switch
Insert the connector of the foot switch
w
into the connec-
tor
e
of the control box
q
.
3-5. V-belt tension
These should approximately 10 - 12 mm of slack when V-
belt is loaded at 9.8 N (1 kgf). To adjust, loosen the two
nuts
q
, and shift the motor up or down.
9.8 N
10 - 12 mm
Red
3-phase
power supply
White
Black
Yellow/Green
.........
Connect to ground