Brother International BAS-343E Instruction Manual - English - Page 42
Standard adjutsments, After the movable knife and fixed knife are properly engaged, tighten the screw.
View all Brother International BAS-343E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Movable knife washer 9. Standard adjutsments 2. Remove the movable knife, and replace it with a new movable knife. Now check the cutting edge of the movable knife o and the fixed knife !.0 If necessary, use the provided movable knife washer (T=0.4, T=0.5, T=0.6) to adjust the knives so that they cut properly. NOTE: A. After the movable knife and fixed knife are properly engaged, tighten the screw. B. Turn the movable knife (in the direction of the arrow) while the screw is still tightened. C. Loosen the screw. D. Turn the movable knife (in the direction of the arrow) while the screw is still loosened. Repeat above steps A, B, C and D four or five times to maintain the cutting performance of the knife. Movable knife A B C D Knives Knives Fix knife Knives Knives With knives engaged 3. Install the fixed knife !0 0.5 mm away from needle hole plate !1. !1 !0 0.5 mm BAS-343E 35