Brother International BAS-343E Instruction Manual - English - Page 52
DIP switch D, The last two stitches at the sewing end will be sewn at low speed approx. 260 rpm
View all Brother International BAS-343E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
10. DIP switch DIP switch D SW No. D - 1 D - 2 D - 3 D - 4 D - 5 D - 6 When ON The first two stitches at the sewing start will be sewn at low speed (approx. 260 rpm) The last two stitches at the sewing end will be sewn at low speed (approx. 260 rpm) The last two stitches at the sewing end will be sewn at low speed (approx. 700 rpm) Slow-speed sewing at the sewing start will be canceled D - 7 When the upper shaft is stopped, the motor will change direction and the needle bar will return to the vicinity of the needle up stop position D - 8 During an emergency stop, the thread is trimmed and the needle bar stops in the raised position. BAS-343E 45
10. DIP switch
45
BAS-343E
■
DIP switch D
SW No.
D - 1
D - 2
D - 3
D - 4
D - 5
D - 6
D - 7
D - 8
When ON
The first two stitches at the sewing start will be sewn at low speed (approx. 260 rpm)
The last two stitches at the sewing end will be sewn at low speed (approx. 260 rpm)
-
The last two stitches at the sewing end will be sewn at low speed (approx. 700 rpm)
-
Slow-speed sewing at the sewing start will be canceled
When the upper shaft is stopped, the motor will change direction and the needle bar will return to the
vicinity of the needle up stop position
During an emergency stop, the thread is trimmed and the needle bar stops in the raised position.