Brother International BAS-343E Instruction Manual - English - Page 34

Sewing, 7-1. Before starting sewing...., 7-2. Sewing operation

Get Brother International BAS-343E PDF manuals and user guides View all Brother International BAS-343E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

7. Sewing 7. Sewing CAUTION Turn off the power switch at the following times, otherwise the machine may operate if the foot switch is depressed by mistake, which could result in injury. • Threading • When replacing the bobbin and needle • When not using the machine and when leaving the machine unattended Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to be machine. 7-1. Before starting sewing.... Check that the needle bar is at the highest position. Turn the machine pulley so that the index mark q on the pulley is almost aligned with the point where belt cover U and belt cover D meet. * If the machine is started while the index mark q is not correctly aligned, error message "E-22" will be displayed (only when memory switch No.14 is on). 7-2. Sewing operation t e r ϓϩάϥϜ/0 PROGRAM NO. ಡॻ R / W 1. Turn the power switch q on. (The power indicator on the operation panel will light.) 2. Insert the floppy disk w. 3. Press the PRO. No. selection switch e to select the desired program number. 4. Press R/W switch r. The floppy disk drive indicator will light and the program no. display t will show a P while the data is being read. When reading is completed, an alarm will sound and the indicator will go out, then the program no. display t will blink the program number. BAS-343E 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
7. Sewing
27
BAS-343E
7. Sewing
7-1. Before starting sewing
....
Check that the needle bar is at the highest position.
Turn
the machine pulley so that the index mark
q
on the pul-
ley is almost aligned with the point where belt cover U
and belt cover D meet.
*
If the machine is started while the index mark
q
is not
correctly aligned, error message "E-22" will be dis-
played (only when memory switch No.14 is on).
7-2. Sewing operation
1.
Turn the power switch
q
on.
(The power indicator on the operation panel will light.)
2.
Insert the floppy disk
w
.
3.
Press the PRO. No. selection switch
e
to select the
desired program number.
4.
Press R/W switch
r
.
The floppy disk drive indicator will light and the pro-
gram no. display
t
will show a P while the data is
being read.
When reading is completed, an alarm will
sound and the indicator will go out, then the program
no.
display
t
will blink the program number.
Turn off the power switch at the following times, otherwise the machine may operate if the foot switch
is depressed by mistake, which could result in injury.
•
Threading
•
When replacing the bobbin and needle
•
When not using the machine and when leaving the machine unattended
Do not touch any of the moving parts or press any objects against the machine while sewing, as this
may result in personal injury or damage to be machine.
CAUTION
プログラ
プログラ
ム
NO.
NO.
�
PROGRAM NO.
読/書�
R / W
e
r
t