Brother International BAS-343E Instruction Manual - English - Page 47
Checking the input sensor and DIP switch input, When sensor is
View all Brother International BAS-343E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
9. Standard adjustments 9-13. Checking the input sensor and DIP switch input ϓϩάϥϜ/0 PROGRAM NO. t BAS-300E series A POWER ϝχϡʔ MENU B.T. SET B.T. CHANGE u r ԣഒ X-SCALE ॎഒ Y-SCALE εϐʔυ SPEED B.T. COUNTER ಡॻ R / W q SPLIT N̤. B TEST STEP BACK e OFF OFF y\ w\ 1. When the SPLIT NO. indicator q is illuminated and the R/W switch e is pressed while the TEST switch w is being pressed, the X-SCALE indicator r will illuminate and the state of the X home position signal will appear on the display screen t. ˙When sensor is ON ˙When sensor is OFF 2. Each time the MENU switch y is pressed, a different indicator will illuminate and the operating condition for the corresponding item will appear on the display screen. • When X-SCALE indicator is illuminated : X home position sensor • When Y-SCALE indicator is illuminated : Y home position sensor • When SPEED indicator is illuminated : Needle up signal (synchronizer) • When B.T. COUNTER indicator is illuminated : 24-section signal (synchronizer) • When SPLIT ON. indicator is illuminated : Needle down signal (synchronizer) 3. If the settings for DIP switch A at the side of the operation panel are changed at this time, the number of the changed switch will appear in the top row of the program number display u. 4. If the settings for DIP switch B are changed at this time, the number of the changed switch will appear in the bottom row of the program number display u. BAS-343E 40