Brother International BAS-343E Instruction Manual - English - Page 35
Set DIP switch A-7 to ON., Sewing, During automatic sewing after the cassette is clamped
View all Brother International BAS-343E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
7. Sewing 5. Depress the work clamp lift pedal y to raise the cassette holding pin. 6. When the cassette is inserted into the mounting support, the sensor will detect it automatically and the cassette will be clamped in place. At this time, the auxiliary work clamp will be lowered. Auxiliary work clamp Pin Cassette 7. Press the starting pedal u. NOTE The work clamp will return to the origin, and will then advance to the sewing start position and blinking will stop. This is only required the first time a program is sewing. 8. Press the starting pedal u again to start sewing. 9. When sewing is finished, the thread will be trimmed automatically, and then the auxiliary work clamp will be raised and the cassette will come away from the pin. During automatic sewing (after the cassette is clamped) Set DIP switch A-7 to ON. 1. Depress the work clamp lift pedal ys to raise the cassette holding pin. 2. When the cassette is inserted into the mounting support, the sensor will detect the cassette automatically and it will be clamped in place. After the feed mechanism has returned to the home position, it will move to the sewing start position and the program cover will stop flashing. This happens only for the first sewing operation after a program has been selected. 3. When the start pedal y is depressed, sewing will start. 4. Same as step 9. above. 5. At the second sewing operation, or if the cassette is removed and re-inserted, the sensor will detect the cassette automatically and sewing will start immediately. * The delay time from the point when the sensor detects the cassette to the start of sewing can be set using memory switch 38 to between 0.1 and 2 seconds in steps of 0.1 of a second. NOTE When the power is turned on after once being turned off, the same pattern of sewing can be continued since the machine will stores the sewing data from the last time. BAS-343E 28