Brother International BAS-343E Instruction Manual - English - Page 50
DIP switch
View all Brother International BAS-343E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
DIP switch A SW No. A - 5 A - 6 A - 7 A - 8 10. DIP switch When ON After sewing is completed, work clamp does not automatically rise (only in split mode) Clamping force output is produced (Inner clamping device available as an option) After the cassette is clamped automatically, sewing operations start automatically. Thread breakage detector device is activated (available as an option) DIP switch B SW No. B - 1 B - 2 B - 3 B - 4 When ON Single split mode activated Thread is not trimmed after an emergency stop Needle cooler output is produced. B - 5 When a rotating-type thread breakage detector device is used, detection precision is increased from 8 to 14. When a fiber-type thread breakage detector device is used, detection precision is increased from 5 to 10. B - 6 B - 7 B - 8 Fiber-type thread breakage detector device is ON, and DIP switch A - 8 is ON (available as an option). When using a 3-stage pedal Feeding speed is switched to high speed. BAS-343E 43