Brother International Innov-ís 40 Users Manual - English - Page 44
Using the foot controller
View all Brother International Innov-ís 40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Press b (start/stop button) once. Insert the foot controller plug into its jack on b the side of the sewing machine. a Start/stop button The machine starts sewing. 2 • If you continue pressing the (start/stop button) immediately after the sewing starts, the machine will sew at a slow speed. When the end of the stitching is reached, c press (start/stop button) once. X The machine stops sewing with the needle down (in the fabric). When you are finished sewing, raise the d needle, and then cut the threads. X For details, refer to "Cutting the thread" (page 46). ■ Using the foot controller Sewing can be started and stopped using the foot controller. a Foot controller jack Turn on the sewing machine. c Slide the sewing speed controller to the left or d right to select the desired sewing speed. Slide the sewing speed controller to the left to sew at a slower speed, or slide the speed controller to the right to sew at a faster speed. a Sewing speed controller • The speed set using the sewing speed controller will be the foot controller's maximum sewing speed. Turn off the sewing machine. a When connecting the foot controller, be sure to turn off the sewing machine in order to prevent the machine from accidentally being started. 43