Brother International Innov-ís 40 Users Manual - English - Page 97
The thread does, not pass through, the eye of the, needle., The stitch is not, sewn correctly.,
View all Brother International Innov-ís 40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
APPENDIX Symptom Probable Cause Remedy Reference The thread does not pass through the eye of the needle. The needle was not raised. The needle is incorrectly installed. Press (needle position button) once or twice to raise the needle. Correctly install the needle. page 21 page 29 The stitch is not sewn correctly. The appropriate presser foot for the Attach the presser foot that is type of stitch that you wish to sew is appropriate for the type of stitch that page 87 not used. you wish to sew. The thread tension is incorrectly set. Adjust the thread tension. page 47 The thread is tangled, for example, in the bobbin case. Remove the tangled thread. If the thread is tangled in the bobbin case, clean the race. page 91 The feed dogs are lowered. Slide the feed dog position switch to . page 73 The stitch is too short. Lengthen the stitch length. page 40 The fabric does not feed. The combination of fabric, thread and needle is incorrect. Select a thread and needle that are appropriate for the type of fabric being sewn. page 28 The thread is tangled, for example, in the bobbin case. Remove the tangled thread. If the thread is tangled in the bobbin case, clean the race. page 91 The sewing lamp does not come The sewing lamp is damaged. on. Contact your dealer or the nearest authorized service center. - 96